4-20mA Wireless Control System 2 Analog Inputs 2 Analog Outputs 2km Wireless Analog System

4-20mA Wireless Control System 2 Analog Inputs 2 Analog Outputs 2km Wireless Analog System

Introduction

LS-RAI02 Modbus RTU is a 1W I/O module, 2 analog inputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for sensor data wireless collection.

Transparent I/O System

Not need internet, no third party cell, no monthly fees

You have full control over your own carrier

Real time status feedback from the remote site

Fast installation and easy setup

LS-RAO02 wireless analog acquisition module

LS-RAO02 Modbus RTU is a 1W I/O module, 2 analog outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for sensor and PLC/HMI wireless communication.

• Transparent I/O System
• Not need internet, no third party cell, no monthly fees
• You have full control over your own carrier
• Real time status feedback from the remote site
• Fast installation and easy setup

Application:

Wireless pump controls

Automate your tank level without running wire between the well pump and the tank. Wireless pump controls save you time and money.

Wireless tank level monitoring
simple wireless monitoring of your tank level from a remote location and receive critical status updates.

Wireless valve activation
Open or close electronic wireless valves, solenoid valves.

Smart agriculture

Pivot irrigation, soil pressure and temperature monitoring

Emergency Notification
Receive critical status updates by email, phone, cell phone, or PDA if equipment fails

Conveyor Control
Control a conveyor motor remotely

Remote Control Relay
Use dry contact inputs to control a remote relay.

Problem Notification
Save time in large facilities by activating an overhead notification light when a problem occurs, letting the supervisor know exactly where to go.

Dust Suppression
Use wireless I/O module to operate your dust

Data Logging
Wirelessly acquire and log various data from a remote location using our analog I/O module

Stacker Control
Start and stop your stacker/reclaimir. Connect PLC in control center with stacker and reclaimer.

Proximity Detection
Mount a transmitter with adjustable range on heavy equipment, mount a receiver in a “blind spot,” and then set up the receiver to sound an alarm or turn on a light whenever the equipment is operating in the area.

Chemical Level Monitoring
Monitor water chlorination or other chemicals remotely.

Traffic Signals
Avoid having to lay new wire by using wireless transmitters and receivers to control traffic signs such as “Railroad Crossing Ahead” when a train is present.

Grain Elevators
Our wireless transmitters and receivers can be used to monitor grain elevator conditions or control different functions. To collect RS485 data. To monitor temperature and humidity in Grain.

Freight Loading
Digital I/O module for crane control and analog I/O module to send the load information wirelessly to another location.

wireless signal transfer

remote i o module

4-20mA Wireless Control System 2 Analog Inputs 2 Analog Outputs 2km Wireless Analog System Images